Rigid plastic smoke evacuation system

Almeva STARR

Features

for oil and gas
moisture resistant
for insertion of straight chimney flues

Parameters

Classification	EN 14471:2013+A1:2015
Operating temperature	up to 120°C
Type of operation	condensing boiler
Fuel	liquid and gaseous fuels
Material	PPH
Average	60 — 315 mm

Description

Characteristics and advantages

It is used for exhausting flue gases from condensing and low-temperature boilers with the highest flue gas temperature at the appliance smoke outlet of 120°C. It is designed mainly for positive pressure and high pressure flue gas paths. It can also be used for natural draught chimneys. It is not intended for flue gas ducts where soot can burn out. It is suitable for chimneys that are planned to be operated in wet operation mode and applicable for flue gas flue from appliances burning gaseous fuels or natural gas (L,H) and liquid fuels (LTO with sulphur content up to 0,2% kerosene).

Components

Complete set
Almeva STARR

1.	STARR plastic chimney head (complete)
2.	Pipe with neck
3.	Revision T‑piece
4.	Revision door
5.	Universal spacer sleeve
6.	STARR 87° heel knee with anchorage
7.	Revision T‑piece with drain
8.	Revision T‑piece with change of direction
9.	Boiler reduction centric