Flexible plastic smoke evacuation system

Almeva FLEX

Features

for oil and gas
moisture resistant
for the insertion of angled chimney vents

Parameters

Classification	EN 14471:2013+A1:2015
Operating temperature	up to 120°C
Type of operation	condensing boiler
Fuel	liquid and gaseous fuel
Material	PPH
Average	60 — 200 mm

Description

Characteristics and advantages

The flexible plastic FLEX smoke extraction system is used for flue gas extraction from condensing and low-temperature boilers with a maximum flue gas temperature of 120 °C at the appliance smoke extraction throat. It is mainly designed for high-pressure and high-pressure flue gas passages, for the insertion of angled chimney flues. It can also be used for natural draught chimneys. It is not intended for flueways in which soot can burn out. It is suitable for chimneys that are planned to be operated in wet operation mode and applicable for flueways from appliances burning gaseous fuels, respectively natural gas (L,H) and liquid fuels (LTO with sulphur content up to 0,2 % kerosene).

Components

Complete set
Almeva FLEX

1.	STARR plastic chimney head (complete)
2.	STARR / Flex adapter
3.	FLEX locking clip
4.	Universal centering sleeve
5.	FLEX locking sleeve
6.	Flexible tube
7.	Revision T‑piece FLEX / FLEX
8.	FLEX 87° knee for insertion, reduced with support